![]() What you’ll want to do is get a Y-cable with 1/4 inch on one end, and a single stereo 1/8 inch on the other. ![]() If so, then it would appear that the only RCA jacks are actually INPUTS, which supports my theory that you are not using the correct outputs. If you CAN’T do this test successfully, then A) make sure the phones volume is up B) make sure that the levels are up on the mic or instrument you are testig with C) try a different jack on your laptop.ĪLSO: I just looked up the LEEM Pro-104, and found this image: Is this the one you have? If you can successfully do this, then A) you have Audacity configured properly B) you have identified the correct jack on your laptop C) you need find a different output from the mixer. In theory, Audacity should record the sound. Now, hit record, and now speak into a mic connected to the mixer, or play an instrument connected to the mixer. Now, tell Audacity that the input is the Line-In (High Definition Audio). In other words, you’re turning your laptop into headphones. Take a cable and go from the headphone jack on the mixer, into your laptop’s line-in jack. You have told Audacity to look for sound where there is no sound (the preferences).Ĭan you plug headphones into your mixer and hear yourself sing or play? If so, then do the following test: remove the headphones, and instead use the headphone jack on your mixer as your output.The fact that you say you can record yourself using headphones doesn’t make sense, and leads me to believe that while you think you’re going in through the headphones, it’s actually the line-in or mic. You have mixed up the headphones jack, line in jack, and mic jack on your laptop.The fact that you said there’s a yellow RCA jack makes me think there’s something wrong there. In other words, there may be no sound coming out of those RCA jacks you have connected to your laptop. You may be trying to take the signal from a tape out or an effects out, or something that is not the correct output. Your mixer likely has various outputs.If I had to guess I would say there are a few scenarios that are causing this not to work for you: The headphone jack does not accept incoming signal. Are you saying that you can plug a microphone into your headphone jack directly and record yourself? If so then you are mistaking the headphone jack from the microphone input. When you say you can record in your laptop using your headphone, I get very confused. In the preferences, select Line-In (High Definition Audio). You need to take a cable from your mixer’s outputs to the line-in.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |